SECTION 3
INSTALLATION OF THE DISPLAY UNIT
3.1 SELECTING THE INSTALLATION POSITION ........................................ 3-1
3.2 INSTALLATION OF THE LCD MONITOR................................................ 3-2
3.3 INSTALLATION OF THE OPERATION UNIT...........................................3-3
3.4 INSTALLATION OF THE POWER CABLE (CFQ-5436) ..........................3-4
3.5 INSTALLATION OF THE CABLE (CFQ-6912) BETWEEN
THE RADAR PROCESS UNIT AND THE SCANNER............................ 3-6
3.6 CONNECTING TO THE GPS RECEIVER................................................3-8
3.7 CONNECTING TO THE GPS COMPASS .............................................. 3-10
3.8 CONNECTING TO NMEA HEADING OUTPUT DEVICE....................... 3-14
3.9 CONNECTING TO THE GYRO AND ELECTROMAGNETIC LOG
(GYRO I/F UNIT SETTING) (OPTON) ..................................................3-16
3.10 CONNECTING TO THE PC PLOTTER ................................................3-21
3.11 CONNECTING TO OTHER NMEA DEVICES ...................................... 3-21
3.12 CONNECTING TO OTHER DEVICES..................................................3-22
3.13 POWER SUPPLY (NBA-5111) (OPTION) ............................................3-24
3.14 TARGET TRACKING (NCA-877WA/877A) (OPTION).........................3-25
3.15 PLOTTER CIRCUIT (NDB-34A) (OPTION)..........................................3-27
3.16 CONNECTING TO AIS (NQA-2103) (OPTION) ...................................3-29
3.17 COASTLINE ROM CARD/MEMORY CARD (OPTION) .......................3-33
3.18 CONNECT SLAVE MONITOR / VDR ................................................... 3-36
3.19 INTERSWITCH UNIT (NQE-3141-4A/8A) (OPTION)...........................3-39
3.20 INSTALLATION OF THE POWER CONTROL UNIT
(NQE-3167) (OPTION)........................................................................ 3-41
3.21 INSTALLATION OF THE LAN CABLE (OPTION) ............................... 3-43
To Next Page
Loading...
Need help?
General
