To Next Page

To Previous Page

CONTENTS

1. OVERVIEW

2. INSTALLATION OF THE SCANNER

2.1 SELECTING THE INSTALLATION POSITION ........................................ 2-1

2.2 INSTALLATION PROCEDURE ................................................................ 2-7

2.3 CONNECTING THE INSTALLATION CABLE NKE-2103

(JMA-5312-6/6HS).................................................................................2-11

2.4 CONNECTING THE INSTALLATION CABLE NKE-2254

(JMA-5322-7/9/6HS)............................................................................. 2-13

2.5 CONNECTING THE INSTALLATION CABLE NKE-1130

(JMA-5332-12) ..................................................................................... 2-15

3. INSTALLATION OF THE DISPLAY UNIT

3.1 SELECTING THE INSTALLATION POSITION ........................................ 3-1

3.2 INSTALLATION OF THE LCD MONITOR................................................ 3-2

3.3 INSTALLATION OF THE OPERATION UNIT .......................................... 3-3

3.4 INSTALLATION OF THE POWER CABLE (CFQ-5436).......................... 3-4

3.5 INSTALLATION OF THE CABLE (CFQ-6912) BETWEEN

THE RADAR PROCESS UNIT AND THE SCANNER ........................... 3-6

3.6 CONNECTING TO THE GPS RECEIVER................................................ 3-8

3.7 CONNECTING TO THE GPS COMPASS .............................................. 3-10

3.7.1 JLR-10 ............................................................................................... 3-10

3.7.2 JLR-20/30 .......................................................................................... 3-12

3.7.3 OTHER MAGNETIC COMPASS........................................................ 3-13

3.8 CONNECTING TO NMEA HEADING OUTPUT DEVICE....................... 3-14

3.9 CONNECTING TO THE GYRO AND ELECTROMAGNETIC LOG

(GYRO I/F UNIT SETTING) (OPTON).................................................. 3-16

3.10 CONNECTING TO THE PC PLOTTER.................................................. 3-21

3.11 CONNECTING TO OTHER NMEA DEVICES ........................................ 3-21

3.12 CONNECTING TO OTHER DEVICES ................................................... 3-22

3.13 POWER SUPPLY (NBA-5111) (OPTION) .............................................. 3-24

3.14 TARGET TRACKING (NCA-877WA/877A) (OPTION)........................... 3-25

3.15 PLOTTER CIRCUIT (NDB-34A) (OPTION) ........................................... 3-27

3.16 CONNECTING TO AIS (NQA-2103) (OPTION) ..................................... 3-29

3.17 COASTLINE ROM CARD/MEMORY CARD (OPTION)......................... 3-33

3.18 CONNECT SLAVE MONITOR / VDR..................................................... 3-36

3.19 INTERSWITCH UNIT (NQE-3141-4A/8A) (OPTION)............................. 3-39

7ZPRD0676

All manuals and user guides at all-guides.com

JRC JMA-5312-6 Installation Manual

Other manuals for JRC JMA-5312-6