– 16 –
It is possible to load the data edited by means of the IA-1 as the working hours setting data.
In the case of using a USB thumb drive, turn the power ON with a medium registered in a given
folder inserted, the data on the medium will be automatically loaded onto the personal computer.
The working hours data cannot be output from the IT-100.
A
3) Input the working hours 8:00 to
17:00.
4) Set the resting time
Select the input of data on rest-
ing times 4 , 5 and 6
.
5) Input the lunch break 12:00 to
13:00.
Input the work break 10:00 to
10:10.
Input the work break 15:00 to
15:10.
6) Setting is completed.
* Section A displays the actual working hours obtained by subtracting the resting time from the length of
time elapsed from the starting to the end of daily work.
Input of working hours
3
Input of working hours
3
Input of resting times 4, 5 and 6
4
Input of a work break
5
Input of a work break
5
Setting is completed
6
To Next Page
Loading...
Need help?
General
