EasyManuals Logo

JUKI IT-100 User Manual

JUKI IT-100
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
– 15 –
No. Item to be set Description
Working condition selec-
tor switch
On the assumption that one sewing machine is used by the operators working
the shift or for sewing two or more different sewing items, three different daily
working conditions (working hours and total production volume)
can
be set. The working conditions set in this step can be invoked on the production
management screen under the normal sewing mode. This eliminates re-setting
of detailed working conditions at the shift time or the sewing item changing.
Working/resting times
setting switch
The starting/nishing times of work and the resting time of day are set. The work-
ing time period can be set more nely with working time and resting time each of
which can be set to three different values.
Refer to the next item "
How to set the working time and resting time"
for details of setting procedure.
*
The actual working time, obtained by subtracting the resting time from the
length of time elapsed from the starting to the end of daily work, is disp
layed.
Daily target production
volume setting switch
The target production volume to be produced from the starting to the end of
working hours in a day is set.
*
When the switch is pressed, the numeric input popup screen is displayed. Input
a set value in the popup screen.
. How to set the working time and resting time
Daily working time is set nely by the working time and resting time each of which can be set to three dif-
ferent values.
The following shows an example of the setting procedure. Input data appropriately referring to the exam-
ple.
Example) Set the following time period for working condition
.
Working hours : 8:00 - 17:00
Lunch break : 12:00 - 13:00
Work break s : 10:00 - 10:10, 15:00 - 15:10
8:00
10:00
12:00 13:00
17:00
15:00
1) Start setting the working time and
resting time
Start inputting data on working condi-
tion
.
2) Set the working time.
Select the input of working time 1
. Input of data on working time 1
<Setting procedure>
Working/resting times setting
Input of data on working time 1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUKI IT-100 and is the answer not in the manual?

JUKI IT-100 Specifications

General IconGeneral
BrandJUKI
ModelIT-100
CategorySewing Machine
LanguageEnglish

Related product manuals