– 45 –
No. Item Setting range Edit unit Remarks
Crosswise compensation of needle
entry of basting
This item sets the amount to move needle
entry position to the right or left when
performing basting more than two cycles.
0.1 to 1.0 0.1mm ※3
Compensation of left side position of
basting
This item sets the amount to move the
sewing reference position of basting from
the center of left overedging to the right or
left.
-2.0 to 2.0 0.1mm ※2,※3
Compensation of right side position of
basting
This item sets the amount to move the
sewing reference position of basting from
the center of right overedging to the right
or left.
-2.0 to 2.0 0.1mm ※2,※3
Speed setting of basting
This item sets speed of basting.
400 to 4200 100rpm ※3
To Next Page
Loading...
