No. Item Setting range Edit unit Remarks
Double stitching cross selection
This item selects overlapped stitching or cross stitching at
the needle entry of parallel section when setting double
stitching.
--- --- ※3
: Overlapped
stitching
: Cross stitching
Compensation of double stitching
width
This item sets amount to narrow
overedging width of 1st cycle when
setting double stitching.
0.0 to 2.0 0.1mm ※3
Number of times of basting
This item sets number of times of basting.
0 to 9 1 ※3
: Without
basting
: 1 to 9 times
Basting pitch
This item sets pitch at the time of
performing basting.
1.0 to 5.0 0.1mm ※3
Rolling length of basting
This item sets rolling length of needle
thread when performing basting.
2.0 to 20.0 0.1mm ※3
Rolling pitch of basting
This item sets rolling pitch of needle
thread when performing basting.
0.2 to 5.0 0.1mm ※3
Rolling width of basting
This item sets rolling width of needle
thread when performing basting.
0.0 to 4.0 0.1mm ※3
Lengthwise compensation of needle
entry of basting
This item sets the amount to move
needle entry position back and forth when
performing basting more than two cycles.
0.0 to 2.5 0.1mm ※2,※3
To Next Page
Loading...
