ā 91 ā
Error
code
Description of error
How to
recover
Place of
recovery
E027 Read error
Data read from server cannot be performed.
Possible to
re-start after
reset.
Previous
screen
E028 Write error
Data write from server cannot be performed.
Possible to
re-start after
reset.
Previous
screen
E029 Lid of Media slot is open. Possible to
re-start after
reset.
Previous
screen
E030 Needle bar upper position failure
When needle does not stop at UP position even with
needle.
UP operation at the time of starting sewing machine.
Possible to
re-start after
reset.
Previous
screen
E042 Operation error
peration of sewing data cannot be performed.
Possible to
re-start after
reset.
Previous
screen
E043 Enlarging error
Sewing pitch exceeds 5 mm.
Possible to
re-start after
reset.
Data input
screen
E050 Stop switch
When stop switch is pressed during machine running.
Possible to
re-start after
reset.
Step screen
E052 Thread breakage detection error
When thread breakage has occurred during machine
running.
Possible to
re-start after
reset.
Step screen
To Next Page
Loading...
