91
4 Configuration parameters
Measurement
normalization
(21 (Profibus-DP))
Additional parameters for the measurement normalization of the internal analog in-
puts can be configured through the Setup software.
For further information, please see the Operating Instructions B 70.6570.2.3
(Interface Description PROFIBUS-DP).
22 (Ethernet) Configuration
➔ Interfaces
➔ 22 (Ethernet)
Setting the parameters
for the Ethernet interface.
IP address
(22 (Ethernet))
Configuration
➔ Interfaces
➔ 22 (Ethernet)
➔ IP address
0.0.0.0 …
192.168.0.10 …
255.255.255.255
IP address of
recorder
Subnet mask
(22 (Ethernet))
Configuration
➔ Interfaces
➔ 22 (Ethernet)
➔ Subnet mask
0.0.0.0 …
255.255.0.0 …
255.255.255.255
Subnet mask
Gateway
(22 (Ethernet))
Configuration
➔ Interfaces
➔ 22 (Ethernet)
➔ Gateway
0.0.0.0 — 255.255.255.255 Gateway address to which
the recorder is connected.
Parameter Value/selection Description