EasyManuals Logo

Jungheinrich TFG 320s User Manual

Jungheinrich TFG 320s
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
161
05.10 EN
Draining the engine oil
Procedure
Remove the floorboard.
Unscrew the filler cap (206).
Thoroughly clean the oil drain plug (205)
and around the drain hole.
Unscrew the oil drain plug.
Collect any oil that emerges.
Screw in the oil drain plug with a new
seal (torque 30 Nm).
Replace the engine oil filter
Procedure
Unscrew and remove the oil filter lid
(207).
Remove the oil filter from the oil filter
housing (208).
Collect any oil that emerges.
Thoroughly clean the raised faces of the
oil filter housing and oil filter lid.
Insert a new oil filter in the oil filter
housing.
Apply a thin layer of oil to the seal of the
oil filter lid.
Torque the oil filter lid to 25 Nm.
Adding engine oil
Procedure
Add fresh engine oil through the filler
port (206) in accordance with the
consumables table.
Check the engine oil level with the
dipstick (204) and top up if necessary,
(see "Consumables" on page 149).
Screw the filler cap back on.
Attach the floor plate.
205
MIN
MAX
206
207
208
MIN
MAX
206
204

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich TFG 320s and is the answer not in the manual?

Jungheinrich TFG 320s Specifications

General IconGeneral
BrandJungheinrich
ModelTFG 320s
CategoryForklifts
LanguageEnglish

Related product manuals