Juniper CTP2024 User Manual

•
Store each module in a separate antistatic bag.
•
Store other components in an antistatic plastic container. Some of these containers
can accommodate several components in separate compartments.
•
Do not store multiple modules or other components in an antistatic bag or container
where they can touch other items.
•
(Optional) Store the item in its antistatic bag or container within the protective
packaging or padded box that the item was shipped in.
Related
Documentation
Required Tools for Maintaining the CTP Platform on page 117•
• Cleaning the CTP Platform on page 118
Cleaning the CTP Platform
Dust is attracted to the area where the air intake vents are located. Clean the area with
a dry cloth every few weeks to prevent excessive accumulation of dust. This cleaning
helps to maintain the efficiency of the cooling system and to prevent damage to electronic
components.
WARNING: Do not insert any metal object, such as a screwdriver, or place
your hand into an open slot or the backplane when the device is on. Remove
jewelry (including rings, necklaces, and watches) before working on
equipment that is connected to power lines. These actions prevent electric
shock and serious burns.
CAUTION: When cleaning the device, wear an antistatic wrist strap connected
to an ESD grounding jack. This action helps to protect modules from damage
by electrostatic discharge.
Related
Documentation
Required Tools for Maintaining the CTP Platform on page 117•
• Storing CTP Modules and Other Components on page 117
Replacing an AC Power Supply
Before you remove a power supply, be aware of the following:
•
The minimum number of power supplies must be present in the router at all times.
•
To maintain proper cooling and prevent thermal shutdown of the operating power
supply unit, each power supply slot must contain either a power supply or a blank
panel. If you remove a power supply, you must install a replacement power supply or
a blank panel shortly after the removal.
•
After powering off a power supply, wait at least 60 seconds before turning it back on.
Copyright © 2017, Juniper Networks, Inc.118
CTP2000 Hardware Documentation

Juniper CTP2024 Specifications

General

Brand	Juniper
Model	CTP2024
Category	Network Hardware
Language	English