Juniper CTP2024 User Manual

CHAPTER 15
Cabling
•
Cabling the CTP2000 Platform Overview on page 101
•
Required Tools, Wires, and Cables for the CTP2000 Platform on page 102
•
CTP2000 Management Ports on page 102
•
Cabling a CTP2000 Interface Module on page 103
•
Cabling the CTP Platform for DC Power on page 103
Cabling the CTP2000 Platform Overview
Cabling the CTP platform requires the following main tasks:
1. Familiarize yourself with the module ports, and ensure that you have the cables and
wires needed to complete each cabling procedure.
2. Read and understand all safety warnings. (See “CTP Safety Guidelines and Warnings”
on page 67.)
3. Connect timing ports.
4. Connect grounding wires to the chassis.
5. Connect the power cables from the power source to the power supply.
6. Connect the interface modules to their appropriate network interface.
For more information about CTP2000 Series cable and pinout specifications, refer Cable
and Pinout Specifications.
Related
Documentation
CTP Cabling Recommendations on page 40•
• Required Tools, Wires, and Cables for the CTP2000 Platform on page 102
• CTP2000 Management Ports on page 102
• Cabling a CTP2000 Interface Module on page 103
• Cabling the CTP Platform for DC Power on page 103
• Setting Up Management Access on the CTP2000 Platform on page 111
• CTP2000 Console Port Setup on page 112
101Copyright © 2017, Juniper Networks, Inc.

Juniper CTP2024 Specifications

General

Brand	Juniper
Model	CTP2024
Category	Network Hardware
Language	English