Juniper CTP2024 User Manual

CHAPTER 11
Installing the Chassis
•
Before You Install the CTP2000 Platform on page 83
•
Installing the CTP2000 Platform in Freestanding Mode on page 83
•
Special Guidelines for Installing CTP2056 Chassis in a Rack on page 84
•
Installing the CTP2000 Platform in a Rack on page 84
Before You Install the CTP2000 Platform
Before installing the platform:
•
Refer to the platform specifications for the particular CTP model or series.
•
Have a plan for installing the device that takes into consideration future expansion.
•
Have the tools and accessories needed to complete the installation.
•
Read and understand the clearance requirements for the front and back of the chassis
for cable routing and other unit access. See“CTP2000 Environmental Requirements”
on page 37 for more information.
•
Read and understand the clearance requirements for the top and bottom of the chassis
to ensure adequate ventilation.
•
Prepare the equipment racks by measuring and marking space for each device and
plenum you plan to install.
Related
Documentation
Installing the CTP2000 Platform in Freestanding Mode on page 83•
• Installing the CTP2000 Platform in a Rack on page 84
Installing the CTP2000 Platform in Freestanding Mode
When installing the device on a table top or in any other freestanding mode, be sure to
leave enough space around the device for adequate ventilation. Position the chassis with
easy access to the connections that it needs for power, local communications, and remote
communications.
83Copyright © 2017, Juniper Networks, Inc.

Juniper CTP2024 Specifications

General

Brand	Juniper
Model	CTP2024
Category	Network Hardware
Language	English