126 Chapter 9 Learn Geode Connect for Windows PC
Geode GNS3 Real-Time Sub-Meter GPS Receiver
9.5.2 Connect Device
The Connect Device screen
allows you to connect your
Windows device to the
Geode.
For more information, see
8.2 Connect with the Geode
on page 108.
9.5.3 Receiver Configuration
This page allows you to
configure the Geode
according to the specific
needs of your project or
application.
Note: The following
screens and options are
only available if you are
actively connected to a
Geode receiver. Changes
saved on these screens
are changes made to the
Geode receiver, not Geode
Connect. This means that
these changes crossover
and are effective in other
navigational and data-
collecting apps.
To Next Page
Loading...