Chapter 9 Learn Geode Connect for Windows PC 147
Owner's Manual
9.5.5 OS Location
Some apps depend on the
Windows operating system
to provide positioning data.
If you are using the
Geode, it is because
your project demands
real-time, sub-meter,
sub-foot, or decimeter
accuracy. However, if your
app is depending on the
operating system, it may
be collecting data via the
consumer-grade receiver in
your PC or tablet—not the
Geode.
The best way to figure out where your app is getting its
positioning data is to take a moment to examine the app.
If the app allows you to directly choose an external receiver,
you can select the Geode and trust that the app will rely on
the Geode. If the app provides no option for choosing an
external receiver, it is most likely relying on the Windows
operating system for its data. You will need to enable
Windows Location Reporting in Geode Connect.
To Next Page
Loading...
Need help?
General