Chapter 5 Learn Geode Connect for iPad and iPhone 33
Owner's Manual
Satellite symbols outlined in red indicate that the satellites
are being tracked, but they are not yet a part of the
positioning solution. Satellite symbols outlined in blue
indicate that a correction is being applied to the signal.
Multi-GNSS Geode models support the Galileo, BeiDou,
GPS, QZSS, SBAS, and GLONASS constellations.
The Skyplot page is meant to be used as a guide. It shows
the relative visibility of satellites in the sky, but it is not an
absolute reference for satellites used in the positioning
solution.
5.3 Points Page
The Points page allows you to demonstrate point capture
and export captured data as CSV, KML, or KMZ files. This
feature allows you to validate the accuracy of the Geode
without requiring the use of a third-party app.
To Next Page
Loading...