Chapter 7 Learn Geode Connect for Android 85
Owner's Manual
If the position does not change, the app is drawing its data
from your Android device’s internal GPS receiver. Return
to page 82 and make sure all mock location provider
settings have been properly configured.
7.5.2 Connect Device
The Connect Device page allows you to connect your
Android device to the Geode.
For more information, see 6.2 Connect with the Geode on
page 65.
7.5.3 Receiver Configuration
Note: The following pages and options are only available
if you are actively connected to a Geode receiver. Changes
saved on these screens are changes made to the Geode
receiver, not Geode Connect. This means that these
changes crossover and are effective in other navigational
and data-collecting apps.
To Next Page
Loading...
Need help?
General