Chapter 7 Learn Geode Connect for Android 69
Owner's Manual
7.1 Home Page
The Home page for Geode Connect serves as a dashboard
for the Geode receiver. On this page, you can view
connection status, correction mode, and position data. It
displays latitude, longitude, altitude, estimated horizontal
error, fix info (GPS, DGPS, RTK, etc.), speed, heading, number
of satellites in fix, PDOP, correction type, and correction
signal. You can drag and drop each box to reorganize the
screen to your preference.
From the toolbar at the bottom of the screen, you can
access the Skyplot, Location, Terminal, and Settings pages.
Tapping on the orange Geode icon in the top left corner will
allow you to disconnect or change your receiver.
To Next Page
Loading...