Chapter 9 Learn Geode Connect for Windows PC 127
Owner's Manual
You can also reach this page by tapping the orange gear in
the bottom right corner of the home screen .
This page allows you to configure the Geode according to
the specific needs of your project or application.
Most of the settings in Geode Connect include a
Description toggle below the options available.
Tapping on Description will reveal detailed descriptions of
the options available for that specific feature.
Port Connection
The Geode remembers its settings per connection type.
You can use the Port Connection option to configure
these settings for each connection type, without physically
switching the connection for the Geode.
1. Tap the three lines in the top left corner to open the
menu.
2. Select Receiver Configuration.
To Next Page
Loading...