36 Chapter 5 Learn Geode Connect for iPad and iPhone
Geode GNS3 Real-Time Sub-Meter GPS Receiver
5.4 Terminal Page
The Terminal page displays the NMEA sentences the Geode
is receiving. It provides the options to include timestamps
(top left) or to pause the data (top right).
At the bottom of the Terminal page, you can send
commands to the Geode. This gives you flexibility to
configure the Geode and customize data output.
1. Tap Send Command.
2. Tap Show/Hide logging to show or hide the NMEA
strings in the terminal.
3. Tap Send custom to enter a custom command.
4. Tap JSHOW to show the current receiver configurations.
To Next Page
Loading...