64 Chapter 6 Set Up Geode Connect for Android
Geode GNS3 Real-Time Sub-Meter GPS Receiver
6. Set Up Geode Connect for
Android
As a configuration and communication utility for the Geode
GNS3 GPS Receiver, Geode Connect provides you with the
ability to establish communications with the Geode; change
receiver settings; and view position, altitude, estimated
horizontal error, differential status/fix information, speed,
heading, satellites in fix, correction signal, and PDOP.
This chapter gives an overview of the features included in
Geode Connect for Android. It gives details about specific
settings that can optimize the Geode’s precision, accuracy,
and reliability, depending on the situation and environment.
It also gives specific instructions about the nuances of using
the Geode with the Android operating system and third-
party apps.
6.1 Download and Install
Geode Connect is available for download on Google Play
and the Juniper Systems website.
6.1.1 Google Play
Search for Geode Connect on Google Play. Install according
to device instructions.
6.1.2 Juniper Systems Website
If your device cannot access Google Play, the app is also
available on the Juniper Systems website.
1. Go to www.junipersys.com/support/geode/downloads.
2. Select Geode Connect for Android.
3. Download the APK file and follow the instructions on
your device to install the app.