Juniper Geode GNS3 - Antenna and Ruggedness Specifications

Owner's Manual
Appendix D Specifications 169
FEATURE SPECIFICATION
Receiver
Protocols
■ Data I/O Protocol: NMEA 0183,
Crescent Raw Binary (proprietary)
■ Correction I/O Protocol: Hemisphere
GNSS Proprietary, ROX, RTCM v2.3,
RTCM v3.2, CMR, CMR+
■ Other: 1PPS Timing Output, Speed
Pulse, Event Marker Input (optional)
Power ■ Input Voltage: 5 V DC @ 2 A USB
■ Power Consumption: 1.7–2 W
nominal
■ Overtime ll Technology™ Battery:
3.6 V 6000 mAh Li-ion
■ GNS3M: 10 hours
■ GNS3S: 15+ hours
■ Charging time less than 4 hours
Output Power ■ Output signals variable from 6 to -6
V DC
Input Power ■ 0 to 5 V DC (max +/- 15 V DC)
Antenna ■ Internal precision single/multi-GNSS
with integrated ground plane
■ External Antenna Port:
■ GNS3M: MCX type, 50 ohm 15
V DC @ 45 mA maximum
■ GNS3S: MCX type, 50 ohm 15 V
DC @ 20 mA maximum
Juniper
Rugged™
■ Operating Temp: -20° C to +60° C
■ Storage Temp: -30° C to +60° C
■ Meets or exceeds MIL-STD 810G
(Drop, Vibration, Temperature,
Ingress Protection)
■ Enclosure Rating: IP68 (1.4 meters
for 30 min)