42 Chapter 5 Learn Geode Connect for iPad and iPhone
Geode GNS3 Real-Time Sub-Meter GPS Receiver
Detailed descriptions of the options are available
underneath each specific setting.
Note: Changes must be saved in order for them to remain
from screen to screen. To save changes, tap Save in the
upper right corner before you leave this screen.
Port Connection
The Geode remembers its
settings per connection
type. You can use the
Port Connection option to
configure these settings
for each connection
type, without physically
switching the connection
for the Geode.
1. Tap Port Connection to
access the menu with
the port options.
2. Select the port you
would like to configure.
3. Change the settings as
desired and tap Save.
These changes will then be set for each time you connect
using that specific port.
To Next Page
Loading...