Chapter 7 Learn Geode Connect for Android 89
Owner's Manual
Update Rate
The update rate sets the
message output rate
through the active port.
To upgrade the update rate,
see 7.5.4 Upgrade Geode
on page 101.
Advanced
The Advanced screen
allows you to configure
the following advanced
settings for the Geode.
■ NMEA Precision
■ Mask Angle
■ Correction Source
■ SBAS
■ Receiver Mode
■ Battery Status Sentence
■ Receiver Reset
Note: Changes saved on this screen are changes made
to the Geode receiver, not Geode Connect. This means
that these changes crossover and are effective in other
navigational and data-collecting apps.
To Next Page
Loading...
