• SRX240 Services Gateway Secure Web Access Overview on page 84
Configuring PoE Functionality on the SRX240 Services Gateway
To enable the PoE feature support on your SRX240 Services Gateway, you must configure
the services gateway.
You can configure PoE using the CLI configuration editor.
For more details on configuring PoE, see the JUNOS Software Interfaces and Routing
Configuration Guide.
Related
Documentation
• SRX240 Services Gateway Description on page 3
• SRX240 Services Gateway Chassis on page 31
• SRX240 Services Gateway Front Panel and Back Panel Views on page 13
• SRX240 Services Gateway Built-In Interfaces on page 16
• SRX240 Services Gateway LEDs on page 18
• Mini-Physical Interface Modules for the SRX240 Services Gateway on page 9
101Copyright © 2015, Juniper Networks, Inc.
Chapter 15: Performing Initial Configuration
To Next Page
Loading...
