Juniper SRX240 - SRX240 Services Gateway Hardware Features; Table 3: SRX240 Services Gateway Hardware Features

Related
Documentation
SRX240 Services Gateway Chassis on page 31•
SRX240 Services Gateway Hardware Features
Table 3 on page 4 lists the hardware features supported on various models of the
SRX240 Services Gateway.
Table 3: SRX240 Services Gateway Hardware Features
SRX240 Services
Gateway with DC
Power Supply
SRX240 Services
Gateway with AC
Power Supply and
PoE Support
SRX240 Services
Gateway with AC
Power Supply and
No PoE SupportFeatures
•
For SRX240H-DC:
1 GB
•
For SRX240H2-DC:
2 GB
•
For SRX240H-POE:
1 GB
•
For
SRX240H2-POE:
2 GB
•
For
SRX240H-POE-TAA:
1 GB
•
For
SRX240H2-POE-TAA:
2 GB
•
For SRX240B:
512 MB
•
For SRX240B2:
1 GB
•
For SRX240H:
1 GB
•
For SRX240H2:
2 GB
•
For SRX240H-TAA:
1 GB
•
For
SRX240H2-TAA:
2 GB
DDR memory
NoYesNoPoE support
190 watts360 watts150 wattsPower supply rating
–48 VDC
Operating range:
-40.5 V to -72 V
100 to 240 VAC100 to 240 VACInput voltage
161616Gigabit Ethernet ports
111Console ports
222Universal Serial Bus
(USB) ports
444Mini-PIM slots
Status, Alarm, HA,
Power, Mini-PIMs,
Port (TX/RX/Link and
PoE), DC power feed
LEDs.
Status, Alarm, HA,
Power, Mini-PIMs, and
Port (TX/RX/Link and
PoE)
Status, Alarm, HA,
Power, Mini-PIMs, and
Port (TX/RX/Link and
PoE)
LEDs
NOTE: The PoE LED is enabled only on the PoE variant of the SRX240 Services Gateway.
Copyright © 2015, Juniper Networks, Inc.4
SRX240 Services Gateway Hardware Guide