Juniper SRX240 - SRX240 Services Gateway AC Power Specifications and Requirements; AC Power Requirement Specifications; AC Power Cord Specifications; Power Requirements and Specifications

• SRX240 Services Gateway Rack Requirements on page 33
• Clearance Requirements for Airflow and Hardware Maintenance on the SRX240 Services
Gateway on page 33
SRX240 Services Gateway AC Power Specifications and Requirements
This topic includes the following sections:
•
AC Power Requirement Specifications on page 37
•
AC Power Cord Specifications on page 37
AC Power Requirement Specifications
The AC power system electrical specifications for the SRX240 Services Gateway are
listed in Table 19 on page 37.
Table 19: AC Power Supply Specifications for the SRX240 Services
Gateway
SpecificationPower Requirement
100 to 240 VACAC input voltage
50 to 60 HzAC input line frequency
2.5 A
4.5 A (for PoE models)
AC system current rating
AC Power Cord Specifications
Table 20 on page 37 depicts the plugs on the AC power cords provided for each country
or region.
Table 20: AC Power Cord Specifications
Model NumberCountry
CBL-JX-PWR-AUAustralia
CBL-JX-PWR-CHChina
CBL-JX-PWR-EUEurope (except Denmark, Italy, Switzerland,
and United Kingdom)
CBL-JX-PWR-ITItaly
CBL-JX-PWR-JPJapan
CBL-JX-PWR-USNorth America
37Copyright © 2015, Juniper Networks, Inc.
Chapter 7: Power Requirements and Specifications