1-21
1.13.6 ERROR HISTORY
This screen allows the history of the 4 most recent errors to be checked.
( ERROR H I STORY )
1 : ERR7101
CAP
M
OTOR FA I LURE
2 : ERR7101
CAP
M
OTOR FA I LURE
3 : ERR7101
CAP
M
OTOR FA I LURE
4 : ERR7101
CAP
M
OTOR FA I LURE
Error code
Latest warning
Warning before the latest
Warning before the above
Warning before the above
Error message
1.13.7 MECHANISM SW INFO
This screen allows the mechanism mode at each error to be displayed.
Item
(MODE)
(ECOD)
(HOUS)
(CASS)
(SAFE)
(BGIN)
(END)
(REM)
(P.TM)
(TEMP)
Description
Mode at the moment of VCR er-
ror & mode immediately before.
Rotary encoder output.
Cassette housing switch status.
Cassette switch status.
REC safety switch status.
Tape begin sensor status.
Tape end sensor status.
Remaining tape at the moment of
error.
POWER HOUR METER data at
the moment of error.
Set’s internal temperature at the
moment of error
Input Pin
—
DV MAIN board
IC401
Pin 44 → CAM0
Pin 45 → CAM1
Pin 46 → CAM2
DV MAIN board
IC401 pin 27
DV MAIN board
IC401 pin 32
DV MAIN board
IC401 pin 47
DV MAIN board
IC401 pin 126
DV MAIN board
IC401 pin 125
—
—
DV MAIN board
IC101 pin 75
Display
PLAY, STILL, REC, REC PAUSE, NO CASSETTE, EJECT,
STNDBY-ON, FF, REW, SHTL, STILL, SHTL X10, SHTL X-10
Shows H or L according to the mechanism position.
Rotary encoder terminal
(ENCD) H L H
CAM0 CAM1 CAM2
ON : Housing inserted/ejected status
OFF : Housing operating status
ON : Cassette tape inserted
OFF : Cassette tape not inserted or during insertion /ejec-
tion
ON : Non-recordable tape inserted, cassette tape not in-
serted or during insertion /ejection
OFF : Recordable tape inserted
ON : Tape leader section detected
OFF : Magnetic tape section detected
ON : Tape leader section detected
OFF : Magnetic tape section detected
Remaining tape time
POWER HOUR METER time
UNDER : under 10°C
NORMAL : 10 to 40°C
HIGH : 40 to 60°C
OVER : over 60°C
(
M
ECHANIS
M
S
W
INFO. )
(
M
ODE ) R EC
REC PAUSE
(EDCD) HLH
( HOUS ) OF F ( CASS ) ON
( SAFE ) OFF
(BGIN)OFF (END)ON
(RE
M
) OOHOOM
(P.T
M
) OOOOOOH
(TEMP) HIGH
→
Display
To Next Page
Loading...
