No.
Item Reference picture/drawing Procedure
2-15
5
3
Middle catcher assembly
6
4
Reel cover assembly
Fig. 2-7-5
<Removal>
1)Remove the 3 screws (S2) and remove the assem-
bly.
<Attaching>
1)Reverse the removal procedure.
Fig. 2-7-6
<Removal>
1)Remove the screw (S2).
2)Slide the assembly toward the drum and lift the
assembly up to remove it.
NOTE
⋅ After having removed the reel cover, take care
because the parts located below the reel
cover tend to slip out easily.
<Attaching>
1)Insert the reel cover into (L6) and attach by revers-
ing the removal procedure.
3
12
(
S2
)
10
(
S2
)
11
(
S2
)
13
(
S2
)
(
L6
)
(
L6
)
4
2-14
To Next Page
Loading...
