JVC GY-DV500U - Playback Mode; Playback Procedure

No. Item Reference picture/drawing Procedure
2-23
16
·
Tension control arm assembly,
‚
Brake control arm assembly,
¡
Charge arm assembly
<Removal>
1)The brake control assembly can be removed after
removing the washer (W1).
<Attaching>
1)Align the phases of the main cam and sub cam ,
then attach by reversing the removal procedure.
Refer to Fig. 2-7-16(b) and Fig. 2-7-16(c).
Fig. 2-7-16(a)
Fig. 2-7-16(b)
Attaching Tension Control Arm Assembly
·
and Brake Control Arm Assembly
‚
Fig. 2-7-16(c) Attaching the Charge Arm
Assembly
¡
Phase alignment
Boss (Phase alignment)
Align the phase of the sub cam
•
, then
attach by fitting the boss into the cam groove.
(
L17
)
29
30
31
(
L16
)
(
L15
)
(
W1
)
34
30
29
35
Bosses
(Phase alignment)
38
31
39
Bosses
(Phase alignment)
Phase
alignment
Align the phase of the main cam
∞
then attach by fitting the
bosses in the cam groove.
2-22