33
Picture Settings Table
The following table show all the available picture setting adjustment on your TV. Not all of these setting apply to all Inputs.
Picture Mode
Your TV has some pre-set picture modes: STANDARD - VIVID - SPORT - FILM - GAME (HDMI). The default
setting is STANDARD. You can also manually adjust each mode.
Auto Backlight Set the Auto backlight to ON - OFF. The default setting is ON.
Backlight
Increases or decreases the brightness of the backlight from 0 - 100. Auto backlight must be OFF to adjust
this setting.
Brightness Increases or decreases the picture brightness from 0 - 100.
Contrast Increases or decreases the picture contrast from 0 - 100.
Colour Increases or decreases the picture colour from 0 - 100.
Sharpness Increases or decreases the picture sharpness from 0 - 20.
Colour
Temperature
The colour temperature setting has 4 preset settings USER - COOL - STANDARD - WARM, when selected
each of these settings has individual adjustments. Red, Green and Blue gain can all be adjusted from -20
to 20.
HDR On Switches High Dynamic Range (HDR) on or off when HDR content is detected.
Picture Format
The picture format can be set to AUTOMATIC - SUPERZOOM - 4:3 - FILM EXPAND 14:9 - FILM EXPAND 16:9
- WIDE SCREEN - FULL. The default setting is FULL.
Advanced
Picture Settings
Select to have more advanced adjustments to your TVs picture.
Hue Increases or decreases the picture hue from -50 (reds) to 50 (greens).
Gamma
Choose from Middle, Bright (standard) or Dark (film). Highlight your desired setting
then press SELECT.
Colour Tuner
Colour Tuner can be switched on and off by selecting ENABLE ON or OFF. Then
you have 5 separate setting that can be individually adjusted. HUE - SATURATION -
BRIGHTNESS - OFFSET - GAIN.
11 Point
White Balance
Correcting
11 Point White Balance Correcting can be switched on and off by selecting ENABLE
ON or OFF. Then you have 4 separate setting that can be individually adjusted. GAIN
- RED - GREEN - BLUE. Gain can be adjusted from 5% to 100%, highlight your desired
setting then press SELECT. Red, Green and Blue can be adjusted from 0 - 100, the
default setting is 50.
Dynamic Noise
Reduction
Dynamic Noise Reduction has 5 different setting OFF - LOW - MEDIUM - STRONG
- AUTO. The default setting is MEDIUM. Highlight your desired setting then press
SELECT.
MPEG Noise
Reduction
MPEG Noise Reduction has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is MEDIUM. Highlight your desired setting then press SELECT.
Adaptive Luma
Control
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is STRONG. Highlight your desired setting then press SELECT.
Local Contrast
Control
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - HIGH. The
default setting is STRONG. Highlight your desired setting then press SELECT.
DI Film Mode
DI Film mode has 2 setting AUTO and OFF. The default setting is OFF. Highlight your
desired setting then press SELECT.
Blue Stretch Blue Stretch can be switched ON or OFF.
Game Mode Game Mode can be switched ON or OFF.
PC Mode PC Mode can be switched ON or OFF.
HDMI RGB Range
(HDMI input only)
HDMI RGB Range has 3 different settings AUTO - FULL - LIMIT. The default setting is
AUTO. Highlight your desired setting then press SELECT.
Reset to Default Resets all setting to factory default settings.
Customising
TV Setting
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 33JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 33 21/01/2021 12:3021/01/2021 12:30
To Next Page
Loading...
Need help?
General
