53
Soundbar/Receiver Settings
Once you have setup your Soundbar or Receiver you will now see either Soundbar or Receiver in the Equipment Control menu.
This will show you all the settings for your device.
• Highlight SOUNDBAR or RECEIVER and press SELECT. You will now see a list of
settings.
Setting Description Options
Volume
Increments
Set the amout the volume increases or decreases when you
ask Alexa to change the volume. The default increment is set
to 4.
• Press REWIND or FAST FORWARD to
increase or decrease the increments.
• Press OPTION to restore back to
default settings.
Infrared
Options
Changes the infrared options.
• IR Profile
• Timing
• Repetition
• IR Controller
Power Controls Adjusts the power ON/OFF settings for your soundbar.
• Power On Delay
• Power Control
Fire TV Inputs Change which inputs we switch for watching Fire TV. • None
Change
Soundbar
If you would like to change the soundbar that's connected to
your TV select Change Soundbar.
Restore
Soundbar
Defaults
Restores all the setting that you may have changed back to
factory defaults.
Advanced
Settings
Adjust the power timing if your Soundbar does not switch ON/
OFF.
• Press REWIND or FAST FORWARD to
increase or decrease the increments.
• Press OPTION to restore back to
default settings.
• Highlight the setting that you wish to adjust and press SELECT. See the table
below for information on each setting.
Setting
Menu
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 53JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 53 21/01/2021 12:3221/01/2021 12:32
To Next Page
Loading...
Need help?
General
