Kaba c-lever 2662-K5 - Tools Required; Spindle Standoff

Installation Manual Installation
17k2evo702 - 201610Kaba c-lever and variants
4.1.2 Tools required
• Drill jig or drilling template
• C-clamp (for work with the drill jig)
• Power drill
• Drill bits Ø9 and Ø13mm
• Flat head and Phillips screwdriver
• Torx screwdriver T-20
• Allen keys, size 2 and 3
• Crimping tool
4.1.3 Spindle standoff
The length of the spindle must be adjusted depending on the door thickness (in-
cluding the backplate(s)) and/or handle types.
Handle type "A" spindle standoff mm
HA 42–79
A
HB 42–68
HC 42–56
HD 42–77
HL 42–92
HM 42–51
HN 42–85
HO 42–50