Installation Manual About this document
5k2evo702 - 201610Kaba c-lever and variants
1 About this document
This section contains information for the proper use of this document.
1.1 Validity
This document describes the product:
Product designation: Kaba c-lever
Types: 262y for profile and round profile cylinder
263y for profile and round profile cylinder
2642 for profile and round profile cylinder
265y for profile and round profile cylinder
266y for profile and round profile cylinder
2672 for profile and round profile cylinder
Article numbers and
variants:
2621-K5, 2622-K5, 2623-K5, 2624-K5 c-lever Standard
2631-K5, 2632-K5, 2633-K5, 2634-K5 c-lever ES1
2642-K5 c-lever support plates/rosette
2661-K5, 2662-K5, 2663-K5, 2664-K5 c-lever support
plates/short plate
2672-K5 c-lever, wide plates
This document describes all product versions and all optional features and functions.
Options are subject to a charge and therefore only available if purchased.
Different options and equipment features are not available in every variant or in all
countries.
1.2 Target group
This document is intended for specialist personnel only.
The descriptions are intended for specialist staff trained by the manufacturer. The de-
scriptions are no replacement for product training.
Service personnel are persons who have the appropriate technical training and ex-
perience required for them to be aware of the risks that could arise for themselves or
others when carrying out these activities and to minimise these risks for themselves
and others. It is the responsibility of the service personnel to ensure that the condi-
tions stated by the manufacturer and the applicable regulations and standards are
complied with when carrying out these activities.
1.3 Contents and purpose
The contents of these instructions are limited to the installation, operation, mainten-
ance and servicing of the product.
To Next Page
Loading...
