Kaba c-lever 2662-K5 User Manual

Service Installation Manual
46 k2evo702 - 201610 Kaba c-lever and variants
Unlocking from the inside
The c-lever, when used with an anti-panic lock, can always be opened by pushing
the lever handle. If there is no anti-panic lock built in, it will function as a built-in lock.
1. Push the lever handle and open the door.
Opening with the emergency battery opening device
If emergency power is supplied by the emergency battery opening device, the lever
handle on the outside of the c-lever remains engaged until the dead batteries have
been replaced.
Unlocking from the outside
Requirement:
• Emergency battery opening device
• Programming cable (product no. 1355- 42)
• Adapter/programming pin (product no. 1355- 42A)
• New batteries 2x 1.5V, AA, lithium
Procedure:
1. Connect the emergency battery opening device to the programming cable and
programming pin.
2. Insert the programming pin into the programming socket of the antenna.
3. Hold the authorised user medium in front of the antenna.
4. Hold down the button on the emergency battery opening device for approx.
1second.
5. Push the lever handle and open the door.
6. Replace the batteries.
7. Carry out a function check.
Unlocking from the inside
The c-lever, when used with an anti-panic lock, can always be opened by pushing
the lever handle. If there is no anti-panic lock built in, it will function as a built-in lock.
1. Push the lever handle and open the door.

Kaba c-lever 2662-K5 Specifications

General

Brand	Kaba
Model	c-lever 2662-K5
Category	Door locks
Language	English