Chapter 4
128 Kaba Ilco Lodging Access Control System
Area.
Minimum keycard: Master Authorization
Shortcut: Swipe authorized keycard, press 5, 3 and 2
Expiry: From 1 to 24 hours
Factory default expiry: 24 hours
Parameters: Restricted Area number
Options: None
E.8 Section Reset
E.9 Floor Reset
E.10 Group Reset
E.11 Zone Reset
E.12 Area Reset
Purpose: (i) Invalidates Sub-master entry keycards for the corresponding Section, Floor,
Group, Zone or Area
and/or
(ii) Assigns a new Sub-master address to the lock.
The Sub-master levels are known as variable addresses since they are designed to be
easily changed using the corresponding Reset keycard to adapt to changes in staff
assignments, or to high and low season needs of the property.
Example: (i) If a housekeeper for Section 1 loses their keycard, insert a Section 1 Reset
keycard in all Section 1 locks and issue new Section 1 keycards, or make new
Section 1 keycards and insert one of them in all Section 1 locks
(ii) If the season changes from high to low, and the rooms in Sections 1 and 2 need to
be combined into one larger Section to be served by a single housekeeper, insert
a Section 1 Reset keycard into the locks with Section address 2, then issue new
Section 1 keycards. The new Section 1 now includes all the locks that were
formerly in Section 2
Minimum keycard: Master Authorization
Shortcut: Swipe authorized keycard, press 5, 3 and 1
Expiry: From 1 to 24 hours
Factory default expiry: 24 hours
Parameters: Type (Section, Floor,
Group, Zone, Area)
Level (1-255) Number of cards
To Next Page
Loading...
