Chapter 7
190 Kaba Ilco Lodging Access Control System
Specify the Authorization number. All entries by keycards encoded using the
specified Authorization will be displayed.
9. Use the down <T> arrow to select the “From audit #” option.
Enter the starting entry in the audit. The default value is 1, which is the newest
one.
10. Use the down <T> arrow to select the “Audit quantity” option.
11. Enter the maximum number of entries in the audit to print. Only the most recent
entries will be displayed, up to the specified number of entries. If an audit
appears more than once, then the last entry is the most recent.
Depending on the media that will receive the result of the audit, the following
steps differ. The 3 following sections describes the particularity of the audit sent
to the FDU screen, to a line printer or to a USB memory stick.
Lock Audit sent to the FDU screen
Press < > to start the audit report. When viewing the audit on the FDU screen,
use the <S> and <T> keys to scroll through the list of entries. The first two
screens will show information about the lock itself.
To Next Page
Loading...
