Auditing
Kaba Ilco Lodging Access Control System 191
The following screens show information on the audit of the lock.
Lock Audit sent to the printer
Connect a serial line printer to the FDU serial port, or a USB line printer to the
USB port. Press <
> to start the audit report. The result of the audit will be sent
to the connected printer.
Lock Audit sent to a USB memory stick.
1. Connect a USB memory stick to the FDU USB port.
2. Select the USB Drive as the media.
3. Press <
> to start the audit transfer to the USB stick.
When the transfer is completed, a message is displayed to the user.
When the transfer is done, from this moment, the USB stick may be removed
and plugged into a PC.
To Next Page
Loading...
