Chapter 3
40 Kaba Ilco Lodging Access Control System
The FDU suggests a new PIN value that was never supplied to date. Otherwise, the
user may decide to choose another PIN. If this is the case, the “New PIN:” option
must be selected with the down <T> arrow and the new PIN code can be entered
using the keypad. A 4 to 8 digit code must be entered.
It is highly recommended to always use the suggested PIN provided by the FDU.
NOTE: If the PIN is already in use by another authorized user the FDU will refuse
the duplicate PIN. Additionally, if the PIN was previously revoked a warning
message will be given. Refer to Section 3.5.5.1 - Create/Assign a PIN – New
employees:
5. Once the PIN is acceptable, press < > to reach the confirmation screen.
Press < > to assign the new PIN to the authorized keycard or press < > to go
back to the previous menu. If accepted, the following message appears:
To Next Page
Loading...
