Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 39
3.5.5.2 Create/Assign a PIN – Existing employees:
Existing employees of certain authorization levels can have a PIN assigned to the keycard
already assigned to them.
1. Swipe a keycard having a GMA or MA authorized user level.
2. Press 7, or use the down <T> arrow followed by < > to reach the “FDU Setup”
menu.
3. Press 3, or use the down <T> arrow followed by <
> to reach the “PIN
Management” menu.
Swipe the keycard corresponding to the authorized user for whom a PIN is to be
created. Keep in mind that only certain authorization levels can have PINs.
The following menu will be displayed:
4. To create a PIN, select the “Add PIN” option using the down <T> arrow and press
the left <W> or right <X> arrow to set the YES value.
To Next Page
Loading...
