Chapter 3
38 Kaba Ilco Lodging Access Control System
If the code is already assigned in the
FDU memory an error message will
appear and a new code will have to be
selected.
Additionally, if the PIN was already
used in the past but is now revoked
(see Section 3.5.5.5 - Revoke an
Existing PIN) a warning message will
be displayed.
When completed, press < > and
swipe the staff keycard to encode the
PIN to this authorized level user.
IMPORTANT: For security, a PIN that is written down should be kept in a safe
place to prevent unauthorized people from knowing it.
IMPORTANT: To ensure ex-employees are unable to access the system, it is
highly recommended to NOT re-enable previously used codes. The
suggested PIN provided by the FDU should always be used.
To Next Page
Loading...
