Kaba ILCO FDU - Chapter 5: Locks - Using and Programming

Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 37
2. Press 6, or use the down arrow <T> and press < > to reach the “Staff Keycard”
menu.
3. Press 2 or use the down arrow <T> to and press < > to reach the “FDU
Authorization” menu.
4. Enter the authorization mumber of the staff keycard being created, and select the
“Assign Pin ?” line with the down <T> arrow. Press the left <W > or right <X>
arrow to set the “Assign PIN” value to YES.
The FDU will suggest a PIN that provides maximum level of security based on its
internal database.
5. If the suggested PIN is acceptable,
press <
> and swipe the staff keycard
to encode the PIN to this authorized
level user.
5. It is highly recommended to always
use the PIN suggested by the FDU,
however, if a different PIN is desired,
press the down
<T> arrow to select
the “PIN code” option and enter a 4 to
8 digit code.