Chapter 3
66 Kaba Ilco Lodging Access Control System
Shortcut: Swipe a GMA keycard, press 7, 2, 2, 1 and 1
Default: Disabled
Options:
Use the left <W> or right <X> arrow to toggle between YES and NO. Press < > to
save the setting.
When set to YES as shown in the image above, the Front Desk Unit will provide an
option for each guest keycard being encoded to add a folio number of up to 19 digits.
By default the Folio is set to NO and no option will be shown for adding a guest folio
number to the guest keycards.
Notes: Folio numbers are only available on triple track FDU systems (FDU-B).
3.6.12. PMS Interface Options
Purpose: Allows the FDU to be used with various Property Management Systems available by
third party vendors. These options are to be used only for the Standard (direct)
interface configuration, and only by the technician installing the interface. For the
Gateway II (indirect) interface configuration, the factory default value must be used.
Take note that those parameters are crucial to have a communication between the
PMS and the FDU. Call Kaba Ilco before changing those parameters.
Shortcut: Swipe a GMA keycard, press 7, 2, 3 and 3
Notes: To use the FDU with PMS interfaces the unit must be configured during the hotel’s
initial configuration at Kaba Ilco.
To Next Page
Loading...
