Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 67
3.6.13. Programming Authorization (PA) Enable
Purpose: Enables or disables the PA level (Authorization numbers 101 to 120).
The programming authorization function allows certain Front Desk Authorization level
staff keycards to also be used to authorize certain staff to program locks, as well as
perform lock audits.
If there are Front Desk Authorization keycards in circulation with addresses between
101 and 120 prior to enabling the PA level, these Authorization keycards become
Programming Authorization keycards automatically. If the PA level is disabled, any
PA keycards in circulation automatically become Front Desk Authorization keycards.
Shortcut: Swipe a GMA keycard, press 7, 2, 3 and 4
Default: PA level disabled
Options: YES: Enabled
NO: Disabled
When “PA Level Enable” is set to YES, Programming Authorization keycards
(Authorization numbers 101 to 120) can be created for staff.
By default “PA Level Enable” is set to NO and Programming Authorization keycards
cannot be created. In this situation Authorization numbers 101-120 can be used for
Front Desk Authorization keycards.
Use the left <W> or right <X> arrow to toggle between YES and NO. Press <
> to
save the setting.
3.6.14. Guest Keycard Read Back Enable without Room
Purpose: Enables the FDU to read the information on a Guest level keycard without knowing
the room number beforehand.
To Next Page
Loading...
