Front Desk Units - Using and Programming
Kaba Ilco Lodging Access Control System 73
Australia). Allows the guest and section keycards to override the thumbturn privacy
for given doors.
Shortcut: Swipe a GMA keycard, press 7, 2, and 4
Default: Disabled
Options: YES: Enabled
NO: Disabled
Select the “Change Priv Ovr” option, and use the left <W> or right <X> arrow to
toggle between YES and NO. NO will preserve any setting on the locks and YES will
allow modifications.
Select the “Global Priv Ovr” option, and use the left <W> or right <X> arrow to
toggle between YES and NO. NO will disable the privacy override and YES will
enable it.
Notes: The Global Privacy Override allows the Australian Privacy functionality. This allows
Section and Guest to override the deadbolt.
For use only with 710-II locks with firmware version 1.25 or higher, and 760 locks &
770 locks with firmware version 1.35 or higher.
To Next Page
Loading...
