Chapter 3
72 Kaba Ilco Lodging Access Control System
When “Create PIN” is set to YES the FDU will be able to be used for assigning PINs
to certain authorization level keycards.
By default “Create PIN” is set to NO and the FDU will not be able to assign PINs.
Use the left <W> or right <X> arrow to toggle between YES and NO. Press <
> to
save the setting.
3.6.20. Time Display
Purpose: To allow the time displayed on the FDU to being either a 12H or 24 H format.
The date format will also be changed dependent on the format selected.
Shortcut: Swipe a GMA keycard, press 7, 2, and 1
Default: 24H
Options: 12H: Time format is 4:35P, date format is mm/dd/yyyy
24H: Time format is 16:35, date format is yyyy-mm-dd
Use the left <W> or right <X> arrow on “Time Display” to toggle between 12H and
24H formats. Press <
> to save the setting.
3.6.21. Privacy Override
Purpose: This is an alternative to mechanical and electrical overrides for 760, 770, and 710-II
lock models in countries that do not typically use deadbolts for privacy features (ex:
To Next Page
Loading...
