SAM
®
RF Operations Manual 102
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Zone Keys (continued)
6. Go to the Zone pull-down box and confirm that
you are creating a key for the appropriate zone. All
zones within your property will appear in the pull-
down box. In fact, the first zone should already be
selected and appear in the box. When you have
selected the desired zone(s), click OK.
7. Now you must name the person to whom you wish to assign the key in
the box under the words, “The Key Is Assigned To.” Click the button to
the right of the box. (This button has a hand pointing to the right.) This
will display the Select User Type PC dialog box.
Note: Zone keys can only be assigned to staff members.
8. Click the open circle next to Staff and click OK. This
will take you to the Staff List PC dialog box. Any staff
members you previously entered into the system will
be listed in this box. Simply click on the name of the
person to receive this key and click Select.
To Next Page
Loading...