SAM
®
RF Operations Manual 104
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Zone Keys (continued)
The SAM RF System designates every new key
created as Key ID 1. Each subsequent key you
create as a duplicate key will be designated Key
ID 2, Key ID 3, etc. – up to Key ID 64. Carefully
assigning key IDs will increase the level of
security the SAM RF System provides – allowing
you to know exactly who has which keys and
helping you make sure that any lost or stolen
keys no longer provide access.
11. Click OK on the PC dialog box screen
message to create additional keys. Follow
the procedure described above to continue
creating zone keys.
Note: The “Keys Made This Session” number at the bottom of the PC dialog box will change to reflect
each key you create.
Note: It is recommended that you label each key as it is created to avoid confusion later.
To Next Page
Loading...