SAM
®
RF Operations Manual 108
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Latch/Unlatch Keys (continued)
The SAM RF System designates every new key created as
Key ID 1. Each subsequent key you create as a duplicate key
will be designated Key ID 2, Key ID 3, etc. – up to Key ID 64.
Carefully assigning key IDs will increase the level of security
the SAM RF System provides – allowing you to know exactly
who has which keys and helping you make sure that any lost
or stolen keys no longer provide access.
9. Click OK on the PC dialog box screen
message to create additional keys. Follow the
procedure described above to continue
creating duplicate keys.
Note: The “Keys Made This Session” number at the bottom of the PC dialog box will change to reflect
each key you create.
Note: It is recommended that you label each key as it is created to avoid confusion later.
To Next Page
Loading...