SAM
®
RF Operations Manual 127
Section 5: Keys
© SAFLOK WL 12/20/2007
Creating Limited Use/Vendor Keys (continued)
7. You must name the person to whom you wish to assign the key in the
box under The Key Is Assigned To. Click the button to the right of the
box. (This button has a hand pointing to the right.) This will display the
Select User Type PC dialog box.
8. Click the open circle next to Vendor and click OK.
This will take you to the Vendor Company List PC
dialog box.
9. Any vendor companies previously entered
into the system will be listed in this box.
Click on the name of the vendor, and then
click Employees.
10. Click on the name of the vendor employee,
and then click Select. This will take you
back to the Create Limited Use Key PC
dialog box.
To Next Page
Loading...