SAM
®
RF Operations Manual 174
Section 7: Reports and Maintenance
© SAFLOK WL 12/19/2007
Auditing Locks (continued)
13. Click on the Utilities menu at the
top of the window or the Utilities
icon.
14. Click on Upload Audit Trail from
Lock(s).
Note: You must keep all USB cables
connected between the electronic key
encoder base, the utility device and the
PC while the key image spins on the PC
screen.
15. At the Confirmation Requested PC dialog box, click Yes
to save these audit records for later viewing.
16. The PC screen will display a Success PC dialog box to
let you know that the audits were successfully saved.
Click OK.
To Next Page
Loading...